 IL
comprises straight pipe lengths and associated fittings
and accessories, twin-wall construction with an aluminium
liner, 6mm air cavity protected by an outer casting of
Zalutite.
Components
easily lock together providing a strong rigid system.
Three diameters, 100mm, 125mm and 150mm. Suitable for
gas appliances, typically in domestic or small commercial
application.
The appliance must always be draught-hooded,
the gas temperature must not exceed 250°C, and
there must be a zero or negative pressure at the
flue outlet.
Manufactured,
tested and Kitemarked to BS 715 1993.
The IL gas
vent is suitable for short external runs which do not
exceed 3 metres. If exceeding 3 metres, ILS can
be used externally and is totally interchangeable with
the IL gas vent.
Click
here for the IL Fire Rating Assessment.
Typical Applications |
